Sorry, I forgot to mention that I do, of course, have the same modems on the
other end of the POTS connection hanging off a WIC-2A/S on a 2600.
Also, for reference I've included the link to the Courier's documentation.
The section about sync mode is chapter 12.
ftp://ftp.usr.com/usr/dl05/1024494.pdf
TIA,
Greg
""Greg Reaume"" <[EMAIL PROTECTED]> wrote in message
90eh6d$j21$[EMAIL PROTECTED]">news:90eh6d$j21$[EMAIL PROTECTED]...
Hi There,
I have a 1750 with a WIC-2A/S (2 Asynchronous/Synchronous Serial) and 2 USR
Courier V.Everything modems attached via 2 DB25-SmartSerial cables. The
courier modems have a synchronous mode I'd like to use and was wondering if
anyone here has tried this configuration before. I've tried putting the
couriers in sync mode and using in-band v.25 dialer on the dialer interface
but I keep getting a message saying encapsulation failed in the debug. I've
tried both PPP & HDLC and got same message.
I don't have too much experience with dial-up so I may be doing something
wrong as far as configuration goes. I've just done ISDN before. If anyone
could provide a sample config or suggestion to get me on the right track I'd
really appreciate it. I've already spent the last 3 days scouring CCO for
some configs but all dial-up stuff with chat-scripts and the like are for
asynchronous and I can't seem to find much on sync. I'd like to use PPP if
possible and bond the two channels.
TIA,
Greg
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
