http://www.cisco.com/warp/public/471/75.html
is a link to making a t1 crossover cable and a 56k crossover cable.
""Wilson, Christian"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is it possible to set up a simulated frame-relay connection between a
cisco
> 3640 and a 2611 in a back to back lab configuration? Both these routers
> have internal csu/dsu 's. I have hooked up two 1602R's with internal 56k
> switched csu/dsu 's back to back to simulate frame. To do this I used a
> cat 5 cable and switched pins 1/7 and 2/8. Can I use this cable on the
3640
> / 2611 csu/dsu's as well? Any help would be greatly appreciated!
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]