Hi Chris,
You can have your loopbacks address as 2.2.2.0/24 but we required
to put in either static or dynamic routing for all the routers to learn abt
this address, otherwise, all other router will not able to ping the loopback
address of other's router. Hope this will answer your questions.
Rgds,
Sam
> -----Original Message-----
> From: Christopher Larson [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, December 06, 2000 2:51 AM
> To: '[EMAIL PROTECTED]'
> Subject: OSPF Loopback
>
> If all the interfaces in say area 0 are 170.100.1.0 /24 and my loopbacks
> are 2.2.2.0/24, should I be able to ping each loopback from all the
> other routers? or do I need to make my loopbacks a subnet of the
> 170.100.1.0/24 address??
>
> Thanx!!
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]