Are you using the documentation that came with the modem to enter the
correct commands into the modem? I suspect you are not using the correct
commands to either enter or save the new parameters. If you don't have the
docs that came with the modems, go to the manufacturers website and download
them.
If, after having gotten the modems to save their parameters, you still have
problems, note their firmware revision and cross reference with the
TAC bug database to see if their are any known problems with certain IOS
revs and MICA modem revs.
BTW, Cisco also has tons of general information on MICA modems. Run a
search for 'mica modems' and you will have more info that you need.
HTH
>From: "Voice Over" <[EMAIL PROTECTED]>
>To: "Frank Wells" <[EMAIL PROTECTED]>
>Subject: Re: modem configuration
>Date: Wed, 6 Dec 2000 15:13:48 +0200
>
>Thanks for your response. I wanna ask another question:
>
>In the configuration of the my modems(those in AS5300)
>there is a setting:
>...
>Automatic Answer: delay 2 second(s)
>...
>I want to reduce this delay to zero. that is answer immediately.
>I enter in the AT command mode by reverse telnetting on the modem and I
>set
>this value to (answer immediately, by setting s0=0 ). when I close this
>reverse telnet session the changes that I made disappears. I couldnt save
>my
>changes to the modem.
>How can I save my changes. I tried &W or *W but it didnt work.
>
>thanks for your attention.
>
>About handshaking:
>the calling modem only supports v22bis. I tried to change the default
>connection protocol from v90 to v22bis. Also I can't save his setting...
>
>----- Original Message -----
>From: "Frank Wells" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Tuesday, December 05, 2000 6:51 PM
>Subject: Re: modem configuration
>
>
> > Why do you suspect modem handshaking as your delay? Modems are
>typically
> > very quick at connection, it is the protocols being run over the links
>which
> > tend to cause the delays.
> >
> >
> > >From: "Voice Over" <[EMAIL PROTECTED]>
> > >Reply-To: "Voice Over" <[EMAIL PROTECTED]>
> > >To: <[EMAIL PROTECTED]>
> > >Subject: modem configuration
> > >Date: Tue, 5 Dec 2000 16:18:18 +0200
> > >
> > >my question is:
> > >can you configure the mica modems in AS5300 so that the handshaking
>time
> > >decreases?
> > >I changed some of the registers in the as5300 mica modems but I
>couldn't
> > >save the changes in AT command mode.
> > >does anybody have any suggestions?
> > >
> > >_________________________________
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>____________________________________________________________________________
>_________
> > Get more from the Web. FREE MSN Explorer download :
>http://explorer.msn.com
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
_____________________________________________________________________________________
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
