In the book, on the spoke routers, all sub-interfaces didn't explicitly
define multipoint or point-to-point inteface, I tried that and IOS 11.2/11.3
requires multipoint or point-to-point interface type to be explicitly
defined.
I think Doyle means to run point-to-point on the spoke routers because if
they are multipoint, by default OSPF network types are mismatched between
hub and spoke.
Am I correct? Or did I miss anything here?
Thanks!
Ken
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
