Luke,
Make sure you select the following settings in HyperTerminal:
Bits Per Second: 9600
Date Bits: 8
Parity: None
Stop Bits: 2
Flow Control: None
Ash
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Luke Everett
Sent: Friday, December 08, 2000 7:09 PM
To: [EMAIL PROTECTED]
Subject: Cisco 2500 Boot
I have 3 different Cisco 2500 routers. When I boot them through =
Hyperterminal I get what is below. It does not allow me to hit enter, =
nothing happens. I have it configured as 9600 Baud, 8 Data Bits, parity =
- none, 1 stop bit, flow control - hardware. It is the same for all =
three of the routers. How can I get these routers running? I know they =
work because I have used them with a laptop before. -=20
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 11.2(18), RELEASE SOFTWARE =
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 05-Apr-99 19:58 by jaturner
Image text-base: 0x0302F3B0, data-base: 0x00001000
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of =
memory.
Processor board ID 02084157, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
IP multicast fastswitching not allowed on X.25 interfaces
IP multicast fastswitching not allowed on X.25 interfaces
Press RETURN to get started!
%LINK-3-UPDOWN: Interface Ethernet0, changed state to up
%LINK-3-UPDOWN: Interface Serial0, changed state to down
%LINK-3-UPDOWN: Interface Serial1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state =
to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state =
to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state =
to down
%SYS-5-CONFIG_I: Configured from memory by console
%SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 11.2(18), RELEASE SOFTWARE =
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 05-Apr-99 19:58 by jaturner
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
