What's means flaps?
try to do a 'debug isdn q931'
then you will see the conversation between you 5300 and the voice switch.
You may also post the debug output here, then I can have a look.
Quncy
CCNP
Hong Kong
empire heights wrote:
> I have 1 as5300 with a voip dial-peer heading to my second as5300. on my
> second as5300 I have pri's setup and I have voice ports 0:d,1:d,2:d,3:d
> and
> dial-peer voice 1 pots
> destinatino-pattern 555....
> no-digit strip
> direct-inward-dialing
> port 0:d
>
> (problem)when I make a call from #1 as5300 to #2 as5300 the call connects,
> however when I change the port to 1:d,2:d, or 3:d the call flaps and NEVER
> connects.
>
> 1) sh isdn status shows MULTI_FRAME_ESTABLISHED for 0:d,1:d,2:d,3:d
> 2) controllers are A' ok
> 3) any call on any dial-peer will NOT connect on 1:d,2:d,3:d
>
> Any ideas
> thanks
>
> _____________________________________________________________________________________
> Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
