Hi.. Presently our setup has a VPN connection, behind the PIX, to connect to the network(remote) at an ISP. All the traffic flows via the VPN box to the remote network. So, there is no dedicated line for remote data transfer or management. The remoe network and and the local network are two separate networks connected to 2 different ISP's and the connection between the networks is established by having static and conduit mappings on the PIX firewall at both the ends. NAT is enabled on both the pix boxes. Now, we have a T1 link coming up to have a dedicated link between the 2 networks and I have the routers at each end with a T1-WIC CSU/DSU card. How do I go abt configring the routers to enable routing between these 2 networks? I have a very vague idea abt how to go.. Please let me know what are the different ways of doing this? Any help would be appreciated.. Thanks __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
