Have this problem in my lab. Two remote routers are calling a central router, via pstn and AUX ports. Two Dialers are configured on the central router, and one of them has to be bound to the async port in case of incoming calls, depending on -which remote router is calling- That is, if RTA calls , Dialer 0 should be chosen - If RTB calls , Dialer 1 should be chosen. Now, the selection of the Dialer should happen basing on "dialer remote-name" command, but probably something is going wrong. - If "dialer remote-name RTA" is only configured on dialer 0 and RTA calls , call is bound to Dialer0. OK. - If Dialer1 is created, but no "dialer remote-name" is included in it, it still works as above. - If "dialer remote-name RTB" is also configured on dialer 1 and RTA calls, it doesn't work (the same if RTB calls). It is "unable to bind async". DOn't understand why it's not working. Has anyone ever encountered this problem? Thanks Max _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
