Hi,
Here is another one I often get into discussion about.
Yes you can do a
router#clear int bri
or in the case where you may want to clear a "B" channel on a primary. Find which is
the relevant channel and do something like.
router#clear int s0/2:23 or whatever
On an Asynch line do a clear int a(whatever)
Hope this helps
Teunis
Hobart, Tasmania
Australia
at 11:32:42 AM, Paul Werner wrote:
>
> > do you know if there is an IOS command that allows to
> disconnect an ISDN
> >
> > call ? So far, I usually shutdown the BRI to disconect the
> call, but I
> > have
> > a feeling there might be an easier way.
>
> Have you considered using this command?
>
> clear interface bri 0
>
> HTH,
>
> Paul Werner
>
> ________________________________________________
> Get your own "800" number
> Voicemail, fax, email, and a lot more
> http://www.ureach.com/reg/tag
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]