you only use the "X" if you're suspending a telnet session and going back to
the main router you're on.
"Bowen, Shawn" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
rp.com...
> Ctrl-shift-6 let go then X
>
> Shawn
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Charles Nunie
> Sent: Thursday, December 21, 2000 12:13 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: [re - A silly question - modified]
>
> Thanx.
>
> For years I've tried to figure that one out.
>
> Dzilo
>
>
> [EMAIL PROTECTED] wrote:
> I believe it is ctrl+shift+6 al at the same time.
>
> Gene
>
> >While I try to ping a remote ip address from the router CLI, I am asked
to
> >type escape sequence to abort.
> >
> >I know I would sound silly asking this question, But to be honest, I
> don't
> >know the answer for this. Can anyone tell me what is the escape sequence
> to
> >abort pinging from the CLI.
> >
> >
> >*** I am pinging from within a telnet session to the Router ***
> >
> >Thanks in Advance,
> >S.Kalidasan
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
