Stephano,
setting the bandwidth of the ethernet port does not reduce the bandwidth.
It just influences some routing protocols to calculate a metric. You may want
to take a look at queueing methods to distribute available bandwidth to
customers. (Althought i am not sure if - eg. custom queueing - could fit
your needs).
greetings
Reinhold
--
Reinhold Fischer [EMAIL PROTECTED]
CCNP-Security/SunCSA/HP Certified Consultant for Network Management
On Wed, 27 Dec 2000, stephano mwendo wrote:
> Haloo guys,
> I have one problem here which is troubling me.
> I have one customer connected to ethernet interface of
> my router through a wireless link.
> The bandwidth at the router ethernet interface is
> configured at 128Kbps.To my suprise the output rate of
> the port reads at sometimes 330Kbps!!!!
> I have this problem because I want to connect other
> customers but my bandwidth seems to be full but I am
> loosing a lot of it this way.
> Can anyone have a solution please.
>
> below is the interface description at "show int"
>
>
> ____________________________________________________
> Ethernet0 is up, line protocol is up
> Hardware is Lance, address is 00e0.1e42.bc84 (bia
> 00e0.1e42.bc84)
> Internet address is 216.x.xx.xx 255.255.255.224
> MTU 1500 bytes, BW 128 Kbit, DLY 1000 usec, rely
> 255/255, load 232/255
> Encapsulation ARPA, loopback not set, keepalive set
> (10 sec)
> ARP type: ARPA, ARP Timeout 4:00:00
> Last input 0:00:00, output 0:00:00, output hang
> never
> Last clearing of "show interface" counters never
> Output queue 0/40, 0 drops; input queue 0/75, 0
> drops
> 5 minute input rate 106000 bits/sec, 115 packets/sec
> 5 minute output rate 338000 bits/sec, 116
> packets/sec
> 15399913 packets input, 1917488770 bytes, 0 no
> buffer
> Received 125968 broadcasts, 0 runts, 0 giants
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0
> ignored, 0 abort
> 0 input packets with dribble condition detected
> 16692518 packets output, 2060062478 bytes, 0
> underruns
> 0 output errors, 169769 collisions, 1 interface
> resets, 0 restarts
> 0 output buffer failures, 0 output buffers
> swapped out
> ______________________________________________________
>
>
> NB:Please help me I need to fix this problem soon
>
>
> =====
> *****************************************************************
> STEPHANO MWENDO
> PO BOX 8806, DAR ES SALAAM, TANZANIA.
> TEL 255 22 2114053
> FAX 255 22 2118956
> MOBILE: 255 744 275559
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
