Under Global config mode, use privilege 12 and then set those in the config,
like such:
username xxx privilege 12 password xxxxxxx
privilege interface level 12 shutdown
privilege configure level 12 interface
privilege exec level 12 configure terminal
privilege exec level 12 configure
privilege exec level 12 show
privilege exec level 12 clear interface
privilege exec level 12 clear counters
privilege exec level 12 clear
-----Original Message-----
From: Devinder Singh [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 28, 2000 3:28 PM
To: '[EMAIL PROTECTED]'
Subject: Privilege level for "Clear" command
Hi..
I have configured a Terminal Server and want that user who logs in to it
should be able to clear the line apart from few other limited command. I
tried lowering the privilege level of the user but it seems that clear
command can be accessed only at privilege level 15. Is there any way to have
lower privilege level for a user so as to limit the access but but still he
should be able to clear the line so that he can connect to machines
connected to terminal server.
Thanks in advance.
Devinder
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
