You shouldn't. I've plugged them into 200V supplies and not had a problem.
>From cco:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2501/2500ug/ovr.htm#xtocid49532
...
100 to 240 VAC
...
-Ben Smith
On Sun, 31 Dec 2000, Albert Lu wrote:
> Hi all,
>
> I'm about to purchase some 2500s from the US, to use in Australia. Are
> there any power conversion issues, as US uses a 120V, and we use 240V over
> here.
>
> I've taken a look at Cisco's website, and the papers there say that it will
> auto-detect the voltage, or something like that.
>
> Just wondering if anyone has any experience in this matter, as I wouldn't
> want to zap it when I plug it in =)
>
> Thanks
>
> Albert
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]