That's because routers don't show default commands. By default, logging
trap informational is turned on.
Regards,
Aaron K. Dixon
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kevin Wigle
Sent: Tuesday, January 02, 2001 10:26 AM
To: cisco
Subject: Syslog
Dear Group,
Happy New Year!
In the lab, trying to configure syslog.
On CCO, an example is given with the command: logging trap informational
I try this and the command is accepted but it is not visible after "sh run".
I had used "logging history information" but I think this is for SNMP
management stations, not syslog.
However, that command is accepted and can be seen after "sh run".
The router is a 7505 running 11.3(2)T
Can anyone lend any insights ?
Kevin Wigle
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]