Hi,
Can anyone explain this:
Little testcase. One port of a Cat.5500(WS-X5224) is connected to a hub. No
other ports are in use.
On this hub are 2 PC's. When I look at the CAM table I see the folowing
entry's
Switch> (enable) sh cam dyn 5/13
VLAN Dest MAC/Route Des Destination Ports or VCs / [Protocol Type]
---- ------------------ -----------------------------------------------
-----
80 00-c0-4f-a9-05-92 5/13 [ALL]
80 80-c0-4f-62-34-de 5/13 [ALL]
80 00-c0-4f-62-34-de 5/13 [ALL]
80 80-c0-4f-a9-05-92 5/13 [ALL]
Total Matching CAM Entries Displayed = 4
Can anyone explain where the extra entry's starting with 80-xx-xx-xx-xx are
coming from?
I would expect to see only the 2 entry's for the PC's.
Regards Richard
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
