Is the switch you're using running enterprise edition IOS ? --------------------------------- cat2924m#conf t Enter configuration commands, one per line. End with CNTL/Z. cat2924m(config)#tacacs-server last-resort ? password The 'enable' password must be provided succeed Access to privileged level is granted cat2924m(config)#tacacs-server last-resort ----------------------------------- Rgrds ----- Original Message ----- From: "Piatnitchi Cristian" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 05, 2001 10:19 PM Subject: tacacs-server last-resort command and Cat2900XL (IOS12.0(5.2)XU) > Hi all > > I am playing in the lab with a Cat2900XL (IOS12.05.2) XU) 24 ports. > I am a little confused with IOSs and command lists from Cisco site. Cisco > web site says that > Catalyst 2900 and 3500 XL have the same IOS. So I read this page to see the > complete list of command. > It is strange that the page show me the command > > tacacs-server last-resort > > here : > http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35xu/cmdref/m > acrcli.htm#xtocid24729124 > > > but the Cat2900 seems to do not know about the command. Any explanation for > that ? > Thanks in advance. > > Cristian > > Ps. I would like to know the way to find the complete set of commands for a > specific device on Cisco site. > Could anybody help me ? > Thanks again > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
