Dear all,
i am setting up an end-to-end isnd connection between two routers using CHAP
athuentication.i seem to make a connection but cant ping even the local side
the show ip route shows it as directly connected interface,when i do show
int bri 0 i see (spoofing)what actually does it mean and how to get rid of
it ??i have checked the configurations and searched on net a lot
configuration seems alright.if possible can someone send me a practical
working config (offcourse ips and passwords omitted).??
i realy would appreciate it.following is a general skecth just for refernce.
following is the configuration
Router 1:
hostname 3600-1
username 2600-1 password google
int bri 0
ip address 10.10.10.1 255.255.255.0
encapsulation ppp
dialer map ip 10.10.10.2 name 2600-1
ppp authentication chap
-----
Router 2:
hostname 2600-1 password google
int bri 0
ip address 10.10.10.2 255.255.255.0
encapsulation ppp
dialer map ip 10.10.10.1 name 3600-1 1267126
ppp authentication chap
Ahmad
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
