The second router must have a password set on the telnet lines. Lika so..
enable
configure terminal
line vty 0 4
login
password letmein
exit
Fletch
<[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi:
>
> Below is router A#. I have checked all my connections and they are fine.
> Her is my questions. How come I can Ping a Host fomr Router A, but I
cannot
> Telnet to the Host, it give me the error msg: "[Connection to 172.16.40.2
> closed by foreign host]"
>
> See Below, TIA, Jess:
>
>
> A#ping 172.16.40.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 172.16.40.2, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
> A#telnet 172.16.40.2
> Trying 172.16.40.2 ... Open
>
>
> Password required, but none set
>
> [Connection to 172.16.40.2 closed by foreign host]
> A#
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
