I am assuming you mean dialup access to the central site. If i am correct, then you can configure it on your NAS. Now there are two ways i know you can do this. 1) Local based AAA 2) Server based AAA With the local based AAA setup, users are authenticated based on local AAA IOS accounts. Here user accounts are stored in the router, also you are limited to the set of AV pairs that are supported on that IOS. On the other hand with the Server based AAA setup, users are authenticated based on AAA negotiations between the router and the AAA server. In this case, user/group profiles and accounting records can be stored in an internal or externel database. You also have a wider array of AV pairs supported. This is more of an enterprise solution. Common AAA Servers are Tacacs+ and Radius, depending on requirements. I hope this is hopeful. cyrax "Taiwo Adeshugba" <[EMAIL PROTECTED]> wrote in message 002f01c07ae4$97dab980$[EMAIL PROTECTED]">news:002f01c07ae4$97dab980$[EMAIL PROTECTED]... > I just need an answer to a question I did on colt and I am a bit confused > after checking it up I wonder if anyone can help. > "IN A REMOTE ACCESS NETWORK, WHERE SHOULD YOU CONFIGURE AAA TO AUTHENTICATE > INCOMING TRAFFIC TO THE CENTRAL SITE". I wonder if anyone can give me an > explanations. > Thanks > > Tai > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
