Check out:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cip.htm
should you want further reference.
""Tony van Ree"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> Use a secondary address.
>
> Example
>
> router#conf t<return>
> router#(config)int e 0<return>
> router#(config-if)ip address 216.x.x.x 255.255.255.240 secondary<return>
> router#(config-if)<ctlr z>
>
> Check it with a show int then confirm with show arp.
>
> Teunis
> Hobart, Tasmania
> Australia
>
>
>
> On Wednesday, January 10, 2001 at 08:47:12 AM, [EMAIL PROTECTED] wrote:
>
> > I request additional ip address block from my ISP. I
> > have 2 ip address blcok: 209.x.x.x /29 and
> > 216.x.x.x/28.
> >
> > How do I configure on my Csico 2524 to use those ip
> > address block ? IS it possible.
> >
> > Thanks.
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Photos - Share your holiday photos online!
> > http://photos.yahoo.com/
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>
>
> --
> www.tasmail.com
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
