Hi,
There is a bridging MAC access list range available on Access-list 700 - 799. Using
"access-list ?" will show this and probably guide you through the configs.
Teunis
Hobart, Tasmania
Australia
On Friday, January 12, 2001 at 03:22:10 PM, Murat Kirmaci wrote:
>
> > Hello Everybody,
> > I would like to insert an access list between two Fastethernet ports at
> > the same Cisco 2621, but here the important criteria is there will be <no
> > ip routing> in the router just only the bridging protocol must be
> > running.Could it be possible to use access list over the interfaces which
> > are just only running bridging?
> > My customer will use it in the same IP network segment, he wants to
> > control some IP hosts by access lists in the mean time there are other
> > protocols that should be passed over these fastethernets
> >
> > I would like to get your opinions .
> >
> > --------------------------------------------
> > Murat KIRMACI
> > CCNA
> > ----------------------------------------------
> >
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]