Hi All,
I've got a 2511 that is booting up this strange message. It keeps repeating
the System Bootstrap message, and I have to Control-break it to show you
the register value.
Does anyone have any ideas? Is it just a config problem, or is there
hardware problems?
Thanks in advance.
Albert
Here is the output:
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 2048 Kbytes of main memory
Local Timeout (control reg=0x118) Error, address: 0x21003EE at 0x111756E
(PC)
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 2048 Kbytes of main memory
Local Timeout (control reg=0x118) Error, address: 0x21003EE at 0x111756E
(PC)
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 2048 Kbytes of main memory
Abort at 0x10E1DB6 (PC)
>o
Configuration register = 0xFFFF2102 at last boot
Bit# Configuration register option settings:
15 Diagnostic mode disabled
14 IP broadcasts do not have network numbers
13 Boot default ROM software if network boot fails
12-11 Console speed is 9600 baud
10 IP broadcasts with ones
08 Break disabled
07 OEM disabled
06 Ignore configuration disabled
03-00 Boot file is cisco2-2500 (or 'boot system' command)
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]