On your CLI, use the command,
write network
the switch will prompt you for a tftp server's ip
address and a name for the config file. as long as
the tftp server responds properly, the config will be
saved.
Regards/Sampath.
--- Jason Tran <[EMAIL PROTECTED]> wrote:
> Hi Group,
>
> I'm new to "set command-based" switch. I have a
> catalyst 5500 that I need
> its config file to be saved on the tftp server.
> Could you tell me which
> command to use. Thank you.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]