My telco has installed a 64K line. I thought I could use a T1 WIC, and set
the bandwidth to 64 and/or use the command service-module timeslot 1 to run
this point-to-point leased line. Is this only possible if the line is
fractional T1?(the question probably should be "what is the line, 64K or
fract. T1) But my telco provider says that the cisco 1602 built-in 56K
module should be used for this line(the 1602 has a T1 module that I bought
for this line; and of course the built-in 56K). A Cisco rep. said no, it
has to be a T1 module. I also have another available module in my 3640 here
at work that has a 56/64K stamped on the back of the hardware module itself.
But when I show int. for that module it says 56K module(bandwidth 1544,
unless I set it to 64k). Which should I use or can I use either/all if
configured correctly? Can someone help clear this up? Thanks for any help.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
