Cross 2-7 & 3-6
probably 3-6 is enough
This chart shows the pinouts for RJ-45 console and AUX ports. The console port does not
use RTS/CTS.
Console/Auxiliary Port (DTE)
----------------------------
Pin Signal Input/Output
----------------------------
1 RTS Output
2 DTR Output
3 TXD Output
4 GND -
5 GND -
6 RXD Input
7 DSR Input
8 CTS Input
Jaeheon Yoo wrote:
> Hi Friends
>
> I am trying to connect two 2501 routers via their AUX ports so that I
> can simulate DDR.
> Could someone send me the cable pinouts or guide me to proper web
> page..
> I spent quite a long time looking in the archieves but didnt find the
> info.
> Please help .
>
> Thanks
>
> Jaeheon
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]