Yes, You need to put on ONE gateway on the NT Server, and that is your
external network. You need to put "route add" statements on the NT Server
to get back to your internal. Make sure you do not have but one default
gateway, this is important as NT will not know which interface to send
packets out if it has multiple. I have the same setup in my office.
Wayne
-----Original Message-----
From: garyty99 [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 18, 2001 12:28 AM
To: [EMAIL PROTECTED]
Subject: about routing in NT server
Hi guys:
i install the checkpoint in my NT server ,the nt server has 3 NIC,one is
connect to external network,one is connected the internal,another one is
connected the DMZ,my question how to routing the packet from internal to DMZ
on NT server,i have open the ip routing in NT server,need i do something
else
thanks
---------------------------------------------
»¶Ó¹âÁÙ http://www.cmmail.com
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
