Hi

     I am trying to make this PPP over Frame-Relay with two Cisco 2501 
running 12.0.5(T) see below. For some reason this does not work? can someone 
please help me to get this to work, I have ran the debug commands and it 
seems like its working but I can not ping each other for some reason.

I have both my config's below...


    


Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname DCE
!
enable password brian
!
username brian password 0 brian
!
!
!
!
ip subnet-zero
!
virtual-profile virtual-template 1
frame-relay switching
cns event-service server
!
!
!
interface Ethernet0
 ip address 64.32.168.37 255.255.255.224
 no ip directed-broadcast
!
interface Virtual-Template1
 ip address 10.1.1.1 255.255.255.0
 no ip directed-broadcast
 no peer default ip address
 ppp authentication chap pap
!
interface Serial0
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 clockrate 64000
 frame-relay lmi-type ansi
 frame-relay intf-type dce
!
interface Serial0.1 point-to-point
 no ip directed-broadcast
 frame-relay interface-dlci 32 ppp Virtual-Template1
!
interface Serial1
 no ip address
 no ip directed-broadcast
 shutdown
!
interface TokenRing0
 no ip address
 no ip directed-broadcast
 shutdown
!
no ip classless
ip route 0.0.0.0 0.0.0.0 Virtual-Template1
no ip http server
!
access-list 1 permit 10.1.1.1
!
!
line con 0
 transport input none
line aux 0
line vty 0 4
 password pp
 login
!
end

DCE#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.0(7)T,  RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 06-Dec-99 17:10 by phanguye
Image text-base: 0x0306C4E0, data-base: 0x00001000

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE 
SOFTW
ARE (fc1)

DCE uptime is 5 minutes
System returned to ROM by power-on
System image file is "flash:c2500-120T.bin"

cisco 2500 (68030) processor (revision E) with 8192K/2048K bytes of memory.
Processor board ID 03897480, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

DCE#






DTE#sho run
Building configuration...

Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname DTE
!
enable password pp
!
username brian password 0 brian
!
!
!
!
ip subnet-zero
!
virtual-profile virtual-template 1
cns event-service server
!
!
!
interface Ethernet0
 ip address 64.32.168.37 255.255.255.224
 no ip directed-broadcast
!
interface Virtual-Template1
 ip address 10.1.1.2 255.255.255.0
 no ip directed-broadcast
 ppp authentication chap pap
!
interface Serial0
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 frame-relay lmi-type ansi
!
interface Serial0.1 point-to-point
 no ip directed-broadcast
 frame-relay interface-dlci 32 ppp Virtual-Template1
!
interface Serial1
 no ip address
 no ip directed-broadcast
 shutdown
!
interface TokenRing0
 no ip address
 no ip directed-broadcast
 shutdown
!
no ip classless
ip route 0.0.0.0 0.0.0.0 Virtual-Template1
no ip http server
!
access-list 1 permit 10.1.1.2
!
!
line con 0
 transport input none
line aux 0
line vty 0 4
 password pp
 login
!
end

DTE#ping 10.1.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
..
Success rate is 0 percent (0/2)
DTE#sho ip int brief
Interface                  IP-Address      OK? Method Status                
Prot
ocol
Ethernet0                  64.32.168.37    YES NVRAM  up                    
down

Serial0                    unassigned      YES NVRAM  up                    up

Serial0.1                  unassigned      YES unset  up                    up

Serial1                    unassigned      YES NVRAM  administratively down 
down

TokenRing0                 unassigned      YES NVRAM  administratively down 
down

Virtual-Access1            10.1.1.2        YES TFTP   up                    
down

Virtual-Template1          10.1.1.2        YES NVRAM  down                  
down

DTE#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.0(7)T,  RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 06-Dec-99 17:10 by phanguye
Image text-base: 0x0306C4E0, data-base: 0x00001000

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE 
SOFTW
ARE (fc1)

DTE uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:/c2500-120T.bin"

cisco 2500 (68030) processor (revision E) with 8192K/2048K bytes of memory.
Processor board ID 02311588, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

DTE#

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to