Hi,
Just a thought but why not set up a dialer interface for your ISDN clients complete
with dailer map statements. You might also need to do something like
interface Serial2:15
no ip address
encapsulation ppp
dialer idle-timeout 1800
autodetect encapsulation ppp v120
isdn switch-type "your switch type"
isdn incoming-voice modem
no peer default ip address
no fair-queue
no cdp enable
ppp authentication chap
Just a thought
Teunis,
Hobart, Tasmania
Australia
On Saturday, January 20, 2001 at 11:41:05 AM, Aftab Rashid wrote:
>
> Hi
>
> I am using AS5300 with 4 PRIs for incoming dialup connection. My normal
> dialup connections through PSTN lines are working fine. But when we dial
>
> using ISDN bri channel, the connection gets established but it do not
> passes the traffic. The PC gets the IP assigned but could not ping even
> to the RAS. When we dial to other brand servers from the same PC and
> ISDN line, it works normally.
>
> Here is configuration of Serial interface for reference.
>
> interface Serial0:15
> ip unnumbered FastEthernet0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 3600
> isdn switch-type primary-net5
> isdn incoming-voice modem
> peer default ip address pool ippool
> fair-queue 64 256 0
> no cdp enable
> ppp authentication pap
> !
>
> Please point out what is missing.
>
>
> Thanks
> Aftab
>
> _________________________________
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
