I don't believe so. I'm pretty sure you cannot do the following:
[DCE/DTE CSU/DSU] <-> DCE/DTE
You must do either
DCE/DTE <-> CSU/DSU <x> CSU/DSU <-> DCE/DTE
or
DCE <-> DTE
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""Alex Lee"" <[EMAIL PROTECTED]> wrote in message
94ivph$3k0$[EMAIL PROTECTED]">news:94ivph$3k0$[EMAIL PROTECTED]...
> Hi group,
>
> Is it possible to have a cable to connect a frame relay switch to a T1/FT1
> DSU/CSU module on another router, i.e a DB-60 male connector on one end of
> the cable and a RJ48C modular jack on the other end ?
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
