Hello all.
I am running 12.07T on a 2501 router. Using the configuration examples I
have found, I should be typing:
Task Command
Step 1 Enter global configuration mode. See Table 2-1.
Step 2 Enable IS-IS routing and specify an IS-IS process for IP, which
places you in router configuration mode. router isis [tag]
Step 3 Configure NETs for the routing process; you can specify a name for a
NET as well as an address. net network-entity-title
Step 4 Enter interface configuration mode. See Table 2-1.
Step 5 Specify the interfaces that should be actively routing IS-IS. ip
router isis [tag]
I type:
router(config)# "router isis" and it accepts it.
router(config)# ?
It is not letting me type "net" or "interfaces" or any other parameters.
Any suggestions?
Thanks,
Scott
Scott Schneidewind
[EMAIL PROTECTED]
408-382-5266
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
