If you are using HyperTerminal on Windows NT, replace it with the
Win95/98 version. The NT version has a bug.
"Lopez, Robert" wrote:
>
> Hello,
>
> I have a 2501 and 2503 that are password protected (console password and
> enable password) and the passwords are not known. I'm following a cisco doc
> that provides instruction on how to recover from lost passwords but it is
> not working.
> http://www.cisco.com/univercd/cc/td/doc/product/iaabu/distrdir/dd4700m/troub
> le.htm#35805
>
> I'm using HyperTerminal and hitting the "break-key" and/or "ctrl-C" upon a
> power recycle.
>
> It's set on terminal key setting. Any suggestions? TIA!!!
>
> Robert
>
> Robert M. Lopez
> Network Planning
> Ann Arbor Data Center
> Pfizer Global Research & Development
> Phone 734-622-3948 Fax 734-622-1690
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
