A little from the archives Cheers Martijn Jansen -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Namens Chris Larson Verzonden: vrijdag 24 november 2000 21:28 Aan: Elias Aggelidis; Michael Ross; [EMAIL PROTECTED] Onderwerp: Re: Home CCNP lab Actually you could get by just fine with 2 or 3 2500 series and a Cat 1900. The CAT 1900 has basically the same OS as 5000. Make sure the 2500's have a couple serial (use them as a frame relay or X.25 switch) and to test ISDN you will need an ISDN interface and ISDN simulator. ----- Original Message ----- From: Elias Aggelidis To: Michael Ross ; [EMAIL PROTECTED] Sent: Friday, November 24, 2000 12:44 PM Subject: Re: Home CCNP lab Hi, I do not think that you need to setup a LAB to pass the CCNP. But if you would like to do it you must have a 55xx, 36xx, 7xx, 25xx and maybe a 4xxx Regards ----- Original Message ----- From: Michael Ross To: [EMAIL PROTECTED] Sent: Friday, November 24, 2000 1:51 AM Subject: Home CCNP lab G Day I am currently looking at setting up a home lab to self study CCNP. I would be most appreciative if any one would be able to assist me by advising what equipment would be required and avaiable to carry out most of the labs. I am in Australia and am willing to purchase second hand equipment. Hopefully the Aussie dollar will improve for exchange rates. Regards, Michael. _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
