The global command is as follows:
ipx sap service-type name network.node socket hop-count
For more information, check out the following link for 11.3. I don't believe the
syntax has changed in further releases.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/cs/csprtn2/csipx.htm#xtocid2835297
*********** REPLY SEPARATOR ***********
On 1/25/2001 at 5:56 PM McGhee, Chris wrote:
>How can I make a Cisco 3640 router begin sending bogus SAP broadcasts in a
>test environment so that when other routers issue the "show ipx servers"
>command it appears that a netware server exists on the nework. I have seen
>this done in the past but am not sure how to accomplish this myself. Please
>respond to my email address below.
>Thanks,
>Chris Mcghee
>[EMAIL PROTECTED]
>
>_________________________________
>FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
---
Peter A. van Oene
Juniper Networks Inc.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
