Easy.
Add the following line to your config:
ip host <name> <2000+line#> <IP address of the Ethernet interface>
The line # of Aux is last TTY + 1.
For example:
ip host modem65 2065 192.168.101.1
Then:
telnet <name>
To exit:
<Ctrl>+<Shift>+<6>, then <x>, then type "disconnect"
Hans Stout wrote:
>
> Hello colleagues,
>
> I have heard that there is a way to reverse telnet into an (analog) modem
> that is attached to the console or AUX port of a Cisco router and to reset
> the modem this way. Does anybody know the exact command sequence ?
> Thanks for your help in advance.
>
> Regards,
>
> Hans
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
