http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v42/pix42cfg/p
ix42cmd.htm#26486
Check out the above link. This should help you. Basiclly you want to
permit echo's going out, and allow echo replys coming in. The rest is in
the doc.
-- Kevin
----- Original Message -----
From: "Hinds, Christopher" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 30, 2001 8:23 AM
Subject: How do I disable ping on outside interface of PIX
> Hi,
>
> I'm trying to disable ping (ibound) on the outside (internet address) side
> of my PIX 520 version 4.4.7 . How can this be done whilst still retaining
> the outbound only icmp access I have for internal machines ?
> cheers
> Chris
>
>
>
>
> **********************************************************************
> This communication is confidential and is intended only for
> the person to whom it is addressed. If you are not that
> person you are not permitted to make use of the information
> and you are requested to notify mailto:[EMAIL PROTECTED]
> immediately that you have received it and then destroy the
> copy in your possession.
> comdirect ltd is regulated by the SFA and is a member of the LSE.
> **********************************************************************
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
