Max4000
10-000 Net/T1
10-100 Line Config
10-1** Factory
1st Line = Disable
2st Line = Disable
Then , the WAN1, WAN2 port will be disable
to enable WAN1, just set 1st Line = Trunk
Since the 4 WAN port works in pairs
WAN1 , WAN2 port is control by 10-000 Net/T1
WAN3, WAN4 is control by 20-000 Net/T1
Ken
""Kazemian, Moe"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó
AD972FBABE9CD411807B00D0B73C82410106E2A4@MILXPR08">news:AD972FBABE9CD411807B00D0B73C82410106E2A4@MILXPR08...
> Hi All
> I would like to know how to change the configuration on MAX-4000 in order
to
> accept traffic from the second PRI interface, and\or how to disable a
> logical port on the existing PRI interface?
> Thanks very much for any input.
>
> -----------------------
> Moe Kazemian MCSE,CCNA
> Sr. Network Engineer
> World Support Organization
> KLA-Tencor Corp.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
