This should work for you.
Brian Dennis
CCIE #2210 (R&S)(ISP/Dial)
CCSI #98640
version 12.0
!
isdn switch-type basic-dms100
!
!
interface Ethernet0
ip address 172.16.1.1 255.255.255.0
ip nat inside
!
interface BRI0
ip address negotiated
ip nat outside
encapsulation ppp
load-interval 30
dialer idle-timeout 600
dialer string 8005551111
dialer load-threshold 1 either
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 800555121201
isdn spid2 800555121301
no cdp enable
ppp authentication chap callin
ppp chap hostname YourISPUserName
ppp chap password YourISPPassword
ppp multilink
!
ip nat inside source list 1 interface BRI0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 BRI0
!
access-list 1 permit any
dialer-list 1 protocol ip permit
!
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
kaushal Bhatt
Sent: Saturday, February 10, 2001 12:34 AM
To: [EMAIL PROTECTED]
Subject: ISDN CONFIG FOR DIALING UP ISP
Hello,
What should be the configuration for ISDN BRI interfacae and DDR, when I =
have to dial-up ISP for getting connected to net, and the ISP will be =
assigning the IP-address through DHCP ?
Regards
Kaushal Bhatt
Systems Administrator
Thermax Systems & Software Ltd
www.thermaxsoftware.com
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
