Xmodem works... Do you have another router (like a 2500) that you can
install that 4 Meg boot flash in a free bay. I usually pull the image into
that second bay of the 2500 router, then physically transfer it to the
4500/4700 router. Your right- they are not quite as smooth as the 3600
(when getting into IOS trouble).
Phil
----- Original Message -----
From: "Rama, Subu" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 11, 2001 7:18 AM
Subject: empty bootflash/flash on a 4500; no tftpdnld, only dnld
> Dear groupstudy:
> We have a 4500M with empty bootflash/flash. We are at the rommon
prompt
> and have access only to "dnld". No "tftpdnld" or "xmodem" commands
> available.
>
> Thought dnld was probably the older name for xmodem and tried using it.
> No success. Each time a new line is received from the sending xmodem
program
> (pro-comm plus), dnld tries to interpret it as a command.
>
> We searched www.cisco.com a lot but I can't find any documentation on the
> "dnld" command.
>
> Any help in getting this 4500 up is appreciated.
>
> Thank you
> Subu
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
