Nandit,
The default config for 1900's (at least when upgraded from standard edition)
is to support bridge groups and not VLAN's. You can change this once you
have the EN software in the menu by going to the System menu and choosing
'Reset system to enable VLANs' (or something like that). This should enable
VLANs on the switch.
Adam
----- Original Message -----
From: "nandit" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Tuesday, February 13, 2001 2:14 PM
Subject: Re cat 1900 enterprise version
> Hi,
> I was able to upgrade from the standard edition to the enterprise version
on
> a switch with the image cat1900EN_9_00_03.bin.bin, but am not getting any
> VLAN configuration utilities.Which version is required for VLAN
> configuration.
> Thanks
> Nandit
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
