I think what you really wanted to do was use "Ip default-network"
here is a link that will explain it to you further and what the difference
is. It has to do with weather you have ip routing enabled on your system.
Karl
http://www.cisco.com/warp/public/105/default.html
-----Original Message-----
From: birs [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 15, 2001 5:02 AM
To: [EMAIL PROTECTED]
Subject: Ip default gateway
Hello
I just had a situation like this:
I connected a Cisco1750 to Catalist2924, and then Catalist2924 to
Catalist8540 and configured "ip default-gateway 10.0.1.1" in
1750(10.0.1.1 is the ip of 8540). Then 1750 was ping'in only 10.0.1.1
255.255.255.240's hosts and no other network in my backbone.
Then I turned "ip default gateway 10.0.1.1" into "ip route 0.0.0.0
0.0.0.0 10.0.1.1" and my Cisco1750 started pinging every ip in my
backbone.
I will be grateful if anyone explains why "ip default-gateway"
didn't worked and what is the difference between these two. Thanks.
Birsen Ozturk
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
