I've done this a million times... Check that you have sufficient room in
FLASH (for both images to reside), Ping the TFTP Server, & Copy TFTP FLASH
(WITH OUT ERASE).
Looks like this:
4500(a)#copy tftp flash
Address or name of remote host []? 10.10.10.10
Source filename []? 12-9Enterprise.MZ
Destination filename [12-9Enterprise.MZ]?
Accessing tftp://10.10.10.10/12-9Enterprise.MZ...
Erase flash: before copying? [confirm]
Erasing the flash filesystem will remove all files! Continue? [confirm]n
Loading 12-9Enterprise.MZ from 10.10.10.10 (via Ethernet0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!
Then:
4500(a)(config)#tftp-server flash 12-9Enterprise.MZ
4500(a)(config)#^Z
4500(a)#wr
Building configuration...
00:09:20: %SYS-5-CONFIG_I: Configured from console by console[OK]
4500(a)#
Lastly:
4500(a)#sh flash
System flash directory:
File Length Name/status
1 8052512 c4500-js-mz.121-6.bin
2 4784286 12-9Enterprise.MZ
[12836928 bytes used, 3940288 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)
I am showing a 4500 with 12.1(6) (the running IOS), housing 12.0(9)Enteprise
destined for all my 2500 series routers. Now- I generally change the IOS
names to avoid personal confusion (so please ignore the clarity ;-)
Good Luck !!!
Phil
----- Original Message -----
From: "Pierre-Alex" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Sunday, February 18, 2001 11:48 AM
Subject: tftp-server :mismatch not ok?
> Hi,
>
> I posted this a few months ago. I am still looking for a good
explaination.
>
> Question: WHY CAN'T I TFTP THE IOS OF THE 2513 INTO THE FLASH OF THE 4000?
> (see below)
>
> Cisco4000(config)#tftp-server
> flash:c2500-js-l_112-17.bin
> Warning: flash:c2500-js-l_112-17.bin does not
> exist. Command retained
>
>
> Cisco2513#copy flash tftp
>
> System flash directory:
> File Length Name/status
> 1 8108960 c2500-js-l_112-17.bin
> [8109024 bytes used, 279584 available, 8388608
> total]
> Address or name of remote host [192.168.0.1]?
> Source file name? c2500-js-l_112-17.bin
> Destination file name [c2500-js-l_112-17.bin]?
> Verifying checksum for 'c2500-js-l_112-17.bin'
> (file # 1)... OK
> Copy 'c2500-js-l_112-17.bin' from Flash to server
> as 'c2500-js-l_112-17.bin'? [yes/no]yes
> ..
> TFTP: error code 2 received - Access denied
>
> THANKS
>
> Pierre-Alex
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]