Hi Pierre-Alex,
The reason you are unable to TFTP an image to/from a Cisco2500 series
router is because, unlike most other platforms, it runs the IOS from
flash. If you do a "show version" on a Cisco2500 the flash will appear
as read-only and not read/write. Therefore, you will have to boot the
router into boot-mode (change the config register to 0x2101) and you
will notice now that the flash is read/write. You will now be able to
TFTP the image to flash.
I hope this helps, and if you have any problems let me know.
Cheers
Darren
From: "Pierre-Alex" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>, "Circusnuts" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Subject: RE: tftp-server :mismatch not ok?(CONFIGS)
Date: Sun, 18 Feb 2001 16:10:59 -0600
Message-ID: <[EMAIL PROTECTED]>
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700
Importance: Normal
In-Reply-To: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTED]
Reply-To: "Pierre-Alex" <[EMAIL PROTECTED]>
Precedence: bulk
Status:
This is very useful thanks!
-----Original Message-----
From: Erick B. [mailto:[EMAIL PROTECTED]]
Sent: Sunday, February 18, 2001 3:58 PM
To: Pierre-Alex; Circusnuts
Cc: [EMAIL PROTECTED]
Subject: RE: tftp-server :mismatch not ok?(CONFIGS)
It looks like the c2500 image you have is a
relocatable image, and the 4000 doesn't support
relocatable images. A relocatable image is one that
can be a different file # on flash. A non-relocatable
image has to be file 1. The 4500 is newer then the
4000 so may support relocatable images; this may be a
bootloader/bootrom version issue as well. cisco.com
will have the info though.
I know when you do a copy tftp on cisco, Pumpkin TFTP
server reports 2-3 aborted transfers before the full
tftp download. This may mean that IOS is checking the
image name or just grabbing the first few bytes of the
file to look at the headers, etc to see if its a valid
image for that router. You can try renaming the image,
etc but I'm not sure what IOS looks at exactly.
--- Pierre-Alex <[EMAIL PROTECTED]> wrote:
> Ok, still does not work!
>
> Cisco4000#copy tftp flash
> Address or name of remote host [192.168.0.253]?
> Source filename [c2500-js-l_112-17.bin]?
> Destination filename [c2500-js-l_112-17.bin]?
> Accessing
> tftp://192.168.0.253/c2500-js-l_112-17.bin...
> %Warning: File not a valid executable for this
> system
> %Error: This platform does not support relocatable
> images.
> Abort Copy? [confirm]n
> Cisco4000#
>
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, February 18, 2001 12:13 PM
> To: Pierre-Alex
> Cc: [EMAIL PROTECTED]
> Subject: Re: tftp-server :mismatch not ok?(CONFIGS)
>
>
> > Abort Copy? [confirm]
> > Cisco4000#
>
> Type the letter N next to confirm. You do not want
> to abort the download &
> you do not want to erase FLASH before copying the
> image.
>
> Phil
>
>
> ----- Original Message -----
> From: "Pierre-Alex" <[EMAIL PROTECTED]>
> To: "Circusnuts" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Sunday, February 18, 2001 7:03 PM
> Subject: RE: tftp-server :mismatch not ok?(CONFIGS)
>
>
> > Alright, I did a tftp-server on the 2513 then I
> did the following:
> >
> > Cisco4000#copy tftp flash
> > Address or name of remote host [192.168.0.253]?
> > Source filename [c2500-js-l_112-17.bin]?
> > Destination filename [c2500-js-l_112-17.bin]?
> > Accessing
> tftp://192.168.0.253/c2500-js-l_112-17.bin...
> > %Warning: File not a valid executable for this
> system
> > %Error: This platform does not support relocatable
> images.
> > Abort Copy? [confirm]
> > Cisco4000#
> >
> > -----Original Message-----
> > From: Circusnuts [mailto:[EMAIL PROTECTED]]
> > Sent: Sunday, February 18, 2001 11:24 AM
> > To: Pierre-Alex; [EMAIL PROTECTED]
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: tftp-server :mismatch not
> ok?(CONFIGS)
> >
> >
> > I've done this a million times... Check that you
> have sufficient room in
> > FLASH (for both images to reside), Ping the TFTP
> Server, & Copy TFTP FLASH
> > (WITH OUT ERASE).
> >
> > Looks like this:
> >
> > 4500(a)#copy tftp flash
> > Address or name of remote host []? 10.10.10.10
> > Source filename []? 12-9Enterprise.MZ
> > Destination filename [12-9Enterprise.MZ]?
> > Accessing tftp://10.10.10.10/12-9Enterprise.MZ...
> > Erase flash: before copying? [confirm]
> > Erasing the flash filesystem will remove all
> files! Continue? [confirm]n
> > Loading 12-9Enterprise.MZ from 10.10.10.10 (via
> Ethernet0):
> >
>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!
> > !!!!!!!!!!!!!!!!!!!!!!!
> >
> > Then:
> >
> > 4500(a)(config)#tftp-server flash
> 12-9Enterprise.MZ
> > 4500(a)(config)#^Z
> > 4500(a)#wr
> > Building configuration...
> >
> > 00:09:20: %SYS-5-CONFIG_I: Configured from console
> by console[OK]
> > 4500(a)#
> >
> > Lastly:
> >
> > 4500(a)#sh flash
> >
> > System flash directory:
> > File Length Name/status
> > 1 8052512 c4500-js-mz.121-6.bin
> > 2 4784286 12-9Enterprise.MZ
> > [12836928 bytes used, 3940288 available, 16777216
> total]
> > 16384K bytes of processor board System flash
> (Read/Write)
> >
> > I am showing a 4500 with 12.1(6) (the running
> IOS), housing
> 12.0(9)Enteprise
> > destined for all my 2500 series routers. Now- I
> generally change the IOS
> > names to avoid personal confusion (so please
> ignore the clarity ;-)
> >
> > Good Luck !!!
> > Phil
> >
> >
> > ----- Original Message -----
> > From: "Pierre-Alex" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Cc: <[EMAIL PROTECTED]>
> > Sent: Sunday, February 18, 2001 11:48 AM
> > Subject: tftp-server :mismatch not ok?
> >
> >
> > > Hi,
> > >
> > > I posted this a few months ago. I am still
> looking for a good
> > explaination.
> > >
> > > Question: WHY CAN'T I TFTP THE IOS OF THE 2513
> INTO THE FLASH OF THE
> 4000?
> > > (see below)
> > >
> > > Cisco4000(config)#tftp-server
> > > flash:c2500-js-l_112-17.bin
> > > Warning: flash:c2500-js-l_112-17.bin does not
> > > exist. Command retained
> > >
> > >
> > > Cisco2513#copy flash tftp
> > >
> > > System flash directory:
> > > File Length Name/status
> > > 1 8108960 c2500-js-l_112-17.bin
> > > [8109024 bytes used, 279584 available, 8388608
> > > total]
> > > Address or name of remote host [192.168.0.1]?
> > > Source file name? c2500-js-l_112-17.bin
> > > Destination file name [c2500-js-l_112-17.bin]?
> > > Verifying checksum for 'c2500-js-l_112-17.bin'
> > > (file # 1)... OK
> > > Copy 'c2500-js-l_112-17.bin' from Flash to
> server
> > > as 'c2500-js-l_112-17.bin'? [yes/no]yes
> > > ..
> > > TFTP: error code 2 received - Access denied
> > >
> > > THANKS
> > >
> > > Pierre-Alex
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations
> to [EMAIL PROTECTED]
> > >
> >
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
__________________________________________________________________
Get your free Australian email account at http://www.start.com.au
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]