I'm trying to have the AGS use flash rather than ROM. I've changed the
jumper settings to 0x2 but each time I try to load the image from flash I
get a traceback and then the ROM image loads. I tried the 11.0.22, 11.0.18
and the 10.3.19a images with the same result.
Here's the ouptput - any suggestions would be greatly appreciated!!!!
%SYS-5-RELOAD: Reload requested
System Bootstrap, Version 5.3(6), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
CSC4 processor with 16384 Kbytes of main memory
######
F3: 5086688+110320+270520 at 0x1000
Booting gs3-k-m.103-19a.Z.bin from flash memory RRRRR
%SYS-3-CPUHOG: Task ran for 173884 msec (3202/1455), Process = Boot Load, PC
= 3783C
-Traceback= 4A2EA 4AB58 DA14 1080 10005EC 1009046
cisco2-csc4
Here's the show version output:
Cisco Internetwork Operating System Software
IOS (tm) GS Software (GS3-K-M), Version 10.3(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Thu 14-Sep-95 17:06 by vatran
Image text-base: 0x00001000, data-base: 0x004DADE0
ROM: System Bootstrap, Version 5.3(6), SOFTWARE
Router uptime is 0 minutes
System restarted by power-on
Running default software
CSC4 (68040) processor with 16384K bytes of memory.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Bridging software.
1 MCI controller (0 Ethernet, 4 Serial).
1 cBus controller.
1 MEC controller (6 Ethernet).
Environmental Controller.
6 Ethernet/IEEE 802.3 interfaces.
4 Serial network interfaces.
1 FDDI network interface.
64K bytes of multibus memory.
64K bytes of non-volatile configuration memory.
4096K bytes of flash memory on MC+ card (via ENVM).
Configuration register is 0x2
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
