Buckle up !!!  I sold my extra 4 Meg FLASH card a few months back & had the
reserve @ $25 (I think)...

http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=511018319&ed=97589194
7

Phil

----- Original Message -----
From: "Stull, Cory" <[EMAIL PROTECTED]>
To: "'Circusnuts'" <[EMAIL PROTECTED]>; "Stull, Cory" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Monday, February 19, 2001 4:52 PM
Subject: RE: Cisco 4000 error ANSWER


> Thanks for all of your replies...  I got TAC involved and it is a bad
> flash...  Anyone know where I can get a 4 meg or 8 meg flash BOARD for a
> Cisco 4000.  Its not a 4000M...
>
> Heres one on E-Bay but I'd rather not wait until the auction is over if I
> don't have to.
>
> http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1215674748
>
> Thanks
> Cory
>
>
>
>
>
>
>
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Monday, February 19, 2001 9:48 AM
> To: Stull, Cory; [EMAIL PROTECTED]
> Subject: Re: Cisco 4000 error message..
>
>
> I know the 4000's can be a pain to break, but break the boot & go to ROM's
> (>o/r 0x41) & then see if everything works that way.  Would venture to say
> your IOS image has been corrupted or the FLASH itself has failed...
>
> Phil
>
> ----- Original Message -----
> From: "Stull, Cory" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, February 19, 2001 3:26 PM
> Subject: Cisco 4000 error message..
>
>
> > Has anyone seen this below error message?   My Cisco 4000 was working
fine
> > for a long time and then all of a sudden failed... no changes have been
> made
> > it...    I've been researching it on Cisco but can't find any good
info..
> > I'm thinking maybe my flash is bad?    I already tried loading a new
image
> > (erased flash) and that didn't help.
> >
> > thanks for your help..
> > Cory
> >
> > > Error : compressed image checksum is incorrect 0x30EAA646
> > >         Expected a checksum of 0x30EA3646
> > >
> > > Exception: Software forced crash at 0x1211e (PC)
> > >
> > > System Bootstrap, Version 4.6(4), SOFTWARE
> > > Copyright (c) 1986-1993 by cisco Systems
> > > 4000 processor with 16384 Kbytes of memory
> > >
> > > Unknown or ambiguous service arg - udp-small-servers
> > > Unknown or ambiguous service arg - tcp-small-servers
> > > Bad interface specification
> > > No interface specified - IP address
> > > Bad interface specification
> > > No interface specified - IP address
> > > Bad interface specification
> > > No interface specified - IP address
> > > Bad interface specification
> > > No interface specified - IP address
> > > Bad interface specification
> > > No interface specified - IP address
> > > Bad interface specification
> > > No interface specified - IP address
> > > Illegal IP keyword - classless
> > > Booting c4000-j-mz.112-24.bin from flash memory
> > > RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR]
> > > F3: 8852+3701831+165008 at 0x12000
> > >
> > > Error : compressed image checksum is incorrect 0x30EAA646
> > >         Expected a checksum of 0x30EA3646
> > >
> > > Exception: Software forced crash at 0x1211e (PC)
> > >
> > > System Bootstrap, Version 4.6(4), SOFTWARE
> > > Copyright (c) 1986-1993 by cisco Systems
> > >
> > > Cory R. Stull
> > > MCSE, CCNP, CCDP, BNCS
> > > Communications Concepts Unlimited
> > > 262-814-7214
> > >
> > >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to