Hi group,
Tried to do Lab #9 (page 183 of All-in-one CCIE Lab Study guide). I was
using a 4500 as frame relay switch and two 2501.
Every 'Sh' command output were basically same as the book. The only
exception is 'Sh frame map' on each of the two routers (RouterA & RouterB).
RouterA#sh frame map
Serial0 <up>: ip 0.0.0.0 dlci 100<0x64,0x1840>
broadcast,
CISCO, status defined, active
RouterB#sh frame map
Serial0 <up>: ip 0.0.0.0 dlci 101<0x65,0x1850>
broadcast,
CISCO, status defined, active
I could not ping either. Apparently the inverse arp is not working. I check
my config on the routers many times. What have I missed ? Can someone in the
group help me with this ? Thanks.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
