Tony,
What are you using as your vpn end point, a pix / concentrator ? With the
two you will need to create a static map in the nat table to direct the vpn
client request to the proper device behind the nat table. you need the ike
client to perform this with win 2k, I have this working into a pix vpn
solution.
jason
-----Original Message-----
From: Tony Russell [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 22, 2001 11:28 AM
To: '[EMAIL PROTECTED]'
Subject: VPN and NAT
I am trying to use a vpn client to get to our corporate network. I am using
a private address space and natting at my router to provide Internet access.
When I try to VPN from a workstation on my LAN it fails.
Has anyone gotten a Windows 2000 machine to VPN when NAT is involved. What
will it take to make this work?
Tony Russell
Network Engineer
IBEAM Broadcasting
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
