interface Serial1/0:15 is simply referring to your d-channel.
Slot 1, port 0, channel 15 (or 16 if you count from 0).
Don't get confused by the Cisco doco - it often refers to the d-channel as
being channel 23 (e.g. s1/0:23), because that's what it is on a T1 PRI used
in the US. You're obviously using an E1 PRI if you've got 30 active
channels, so the d-channel is :15.
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 23/02/2001
08:38 am ---------------------------
"Stephen D Skinner" <[EMAIL PROTECTED]>@groupstudy.com on
23/02/2001 05:11:09 am
Please respond to "Stephen D Skinner" <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: ODD isdn config
GUYS
i have this odd isdn config which don`t make any sense to me...
!!! interface Serial1/0:15 !!!!!
no ip address
no ip directed-broadcast
encapsulation ppp
no ip split-horizon
load-interval 30
dialer pool-member 1 max-link 20
dialer pool-member 3
isdn switch-type primary-net5
isdn sending-complete
fair-queue 64 256 0
no cdp enable
ppp authentication chap
ppp multilink
It`s the FIRST line i don`t understand....you see if i do an " SHOW ISDN
ACTIVE" ,it brings up 30 channels of my ISDN 30 as active....
when i do as SHOW INT it shows all 30 ...but i thought that "serial 1/0:15
meant
only channels 0-15..i.e 16 channels...
am i being thick or what ???
thanks in advance
Stephen Skinner
GIS UK Operations,Esso Petroleum Company
St. Catherines House.
2 Kingsway, PO Box 397, London WC2B 6WJ
External Email:[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
