I don't know a whole lot about the rate limiting portion, but the ACL would
look like this.
access-list 123 permit ip 207.106.23.0 0.0.0.127 any log
access-list 123 permit ip 207.106.23.128 0.0.0.63 any log
[EMAIL PROTECTED] wrote in message <979ke8$htc$[EMAIL PROTECTED]>...
>I want to limit the following output from fast ethernet 0/0 to 768000 with
>burst to 1500000
>I created rate-limit input access-group 123 1500000 1500000 1500000
>conform-action transmit exceed-action drop
>access-list 123 was supposed to reflect the ip range
>207.106.23.1-224
>access-list 123 permit ip 207.106.23.1:255.255.255.128 any log
>this might only do the first half of class C right?
>if so how do I get where I"m going?
>
>_________________________________
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
