Yes, search for "mode ccs" on CCO. I've done this with PRI's (T1) between
two Nortel PBX's over a frame relay WAN using 3810-V3's. It's the same for
your senario. Oh, I used VOFR because of its lower overhead.
If you can't find an example, let me know and I'll find one up for you.
Rodgers Moore
""Mitesh Khatri"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi!
>
> Does anyone know if it is possible to allow No. 7 signaling on a NEC PABX
to
> be transferred transperantly over a WAN consisting of Cisco Voice/Data
> routers such as MC3810s, Cisco 2610s and Cisco 3640s to a remote NEC PABX.
> All the Cisco routers have a Digital Voice E1 module connecting to the NEC
> Pabx. The Cisco routers compress the voice to 8 k and are using VoIP
between
> the sites.
>
> If anyone has done such a thing with Cisco routers and NEC PABX or with
any
> other PABX , your advise will be appreciated.
>
>
>
> Thanks,
>
> Mitesh
>
>
>
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
